Print-in-place Articulated Dragon!!
Huge, very flexible, and printed in one piece without supports. Just the mustache needs to be assembled after printing
It can be scaled up or down as much as you want (the limit is your printer capabilities).
Disclaimer: The Dragon doesn't stand upright. Some pictures have been taken using a metal wire stand for display purposes.
A good first layer is mandatory for the print to succeed. Be sure your printer is calibrated and you have good bed adhesion. I recommend a slow and thick first layer (8 mm/s and 0.3 mm).
Good layer cooling is also recommended, as it prevents curling and warping on overhangs.